Little help with wirelwss setup pls

[brick-it]

Running a cisco 877w, think i have bridged interfaces ok but wlan 'ok' flashes and i cannot connect... wired lan ports are ok.

version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
logging message-counter syslog
enable secret 5 $1$tOgJ$o8qe6dsViZEsTbAQJblSF.
!
no aaa new-model
clock timezone GMT 0
!
!
dot11 syslog
!
dot11 ssid cisco
vlan 1
authentication open
authentication key-management wpa
wpa-psk ascii 0 xxxxxxxxxx
!
ip source-route
!
!
ip dhcp excluded-address 192.168.0.1 192.168.0.10
!
ip dhcp pool DATA
network 192.168.0.0 255.255.255.0
default-router 192.168.0.1
dns-server 4.2.2.2
!
!
ip cef
no ip domain lookup
ip name-server 4.2.2.2
ip ddns update method sdm_ddns1
DDNS both
!
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
username xxxxxx privilege 15 password 0 xxxxxx
!
!
!
archive
log config
hidekeys
!
!
!
bridge irb
!
!
interface ATM0
no ip address
no atm ilmi-keepalive
!
interface ATM0.1 point-to-point
pvc 0/38
pppoe-client dial-pool-number 1
!
!
interface FastEthernet0
spanning-tree portfast
!
interface FastEthernet1
spanning-tree portfast
!
interface FastEthernet2
spanning-tree portfast
!
interface FastEthernet3
spanning-tree portfast
!
interface Dot11Radio0
no ip address
!
encryption vlan 1 mode ciphers tkip
!
broadcast-key vlan 1 change 45
!
!
ssid cisco
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0
54.0
channel 2462
station-role root
rts threshold 2312
!
interface Dot11Radio0.1
description Cisco Open
encapsulation dot1Q 1 native
no cdp enable
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Vlan1
no ip address
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1412
bridge-group 1
bridge-group 1 spanning-disabled
!
interface Dialer0
ip ddns update hostname xxxxxxxxxx
ip ddns update sdm_ddns1
ip address negotiated
ip mtu 1452
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap callin
ppp chap hostname xxxxxxxxxxxxxxxxxxxxx
ppp chap password 0 xxxxxxxxxx
interface BVI1
ip address 192.168.0.1 255.255.255.0
ip broadcast-address 192.168.0.0
ip nat inside
ip virtual-reassembly
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
ip http server
no ip http secure-server
!
!
ip nat inside source list 1 interface Dialer0 overload
!

access-list 1 permit 192.168.0.0 0.0.0.255
dialer-list 1 protocol ip permit
!
!
!
!
!
control-plane
!
bridge 1 protocol ieee
bridge 1 route ip
alias exec atm show dsl interface atm 0
!
line con 0
logging synchronous
no modem enable
line aux 0
line vty 0 4
login
!
scheduler max-task-time 5000
end

[sirkozz]

Check out this config from an 871, I know some of the settings are quirky but it should give you what you need. Reply if you need more help.


!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname w01
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
!
resource policy
!
ip subnet-zero
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.0.1 192.168.0.10
!
ip dhcp pool sdm-pool
network 192.168.0.0 255.255.255.0
default-router 192.168.0.1
lease 0 2
!
!
no ip domain lookup
ip domain name t.com
!
!
username administrator privilege 15 secret 0 drm
!
!
!
bridge irb
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
ip address dhcp client-id FastEthernet4
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
!
interface Dot11Radio0
no ip address
ip access-group 120 in
!
encryption key 1 size 128bit 0 3A3D402C662B315D615C417E48 transmit-key
encryption mode wep mandatory
!
ssid 0000
authentication open
!
speed basic-1.0 basic-2.0 basic-5.5 basic-11.0
station-role root
bridge-group 1
bridge-group 1 spanning-disabled
!
interface Vlan1
no ip address
ip tcp adjust-mss 1452
bridge-group 1
!
interface BVI1
ip address 192.168.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
!
ip classless
!
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 100 interface FastEthernet4 overload
!
access-list 100 permit ip 192.168.0.0 0.0.0.255 any
access-list 111 permit tcp any any neq telnet
access-list 120 permit udp any any eq bootpc
access-list 120 permit udp any any eq bootps
access-list 120 permit tcp any host 10.185.15.250 eq 5252
access-list 120 permit icmp any host 10.185.15.250
no cdp run
!
control-plane
!
bridge 1 protocol ieee
bridge 1 route ip
!
line con 0
access-class 111 in
login local
no modem enable
line aux 0
line vty 0 4
access-class 111 in
privilege level 15
login local
transport input telnet ssh
!
scheduler max-task-time 5000
end